Search for products by number, type or name:

55NiCrMoV7 – W. Nr 1.2714 – VAL41V

UNI

Werkstoff Nr

Nome Ferlat

This steel has high-hot-performance for extrusion dies. It can be tempered in air and oil; it’s machinable after annealing and tempering. It will not crack or deform when tempered in air because it has raised toughness. Normally the stamps must be tempered to produce a hardness of 110/120 Kg/mm²s. It’s used in the manufacture of hammer and pile-driver, hot matrixes, wedge gears, punches and matrixes for cold employment, cylinders for hot rolling mills, etc.

Supplying: tempered

Description

ACCIAI DA UTENSILI PER LAVORAZIONI A CALDO - 55NiCrMoV7 - 2714 (VAL41V) - W. Nr. 1.2714 - UNI EN ISO 4957

CMn Si Cr NiMo V
0.550.800.301.201.650.500.10

*indicative average values

55NiCrMoV7 - 2714 (VAL41V) - W. Nr. 1.2714

HB
~380

*indicative average values

Additional Information
UNI

Werkstoff Nr

Nome Ferlat

ACCIAI DA UTENSILI PER LAVORAZIONI A CALDO - 55NiCrMoV7 - 2714 (VAL41V) - W. Nr. 1.2714 - UNI EN ISO 4957

CMn Si Cr NiMo V
0.550.800.301.201.650.500.10

*indicative average values

55NiCrMoV7 - 2714 (VAL41V) - W. Nr. 1.2714

HB
~380

*indicative average values